Today i am going to show you How To Format USB pendrive Using Windows Command Prompt (CMD) Windows Command Prompt (CMD) Command Prompt is a feature of Windows that provides an entry point for typing MS‑DOS (Microsoft Disk Operating System) commands and othercomputer commands. The most important thing to know is that by typing commands, you can perform tasks on your computer without using the Windows graphical interface.
Step 1 . Turn on computer as normal
Step 2. Once you are in your desktop insert Pen drive into USB port
Please note: if you know the letters associated with your disk locations or can use a utility such as disk part to list this information then skip steps 3 and 4
Step 3.Go into my computer (accessible from the start menu or desktop) and look down the navigation panel on the left hand side, this lists down to the popular and root menu folders and locations on your computer.
Step 4. Your Pen drive should be listed in one of these locations, it may be referred to by brand, as portable storage or something similar. Next to this label will be a letter,
for example “G: removable storage device” if the device does not show up you may need to test the port to find the letter with another USB device. This letter needs to be written down or remembered in order to complete this process.
Step 5. Go to the windows start menu, click start or the Windows symbol depending on your edition of Windows, then click run.
Step 6. Type cmd into the run dialog box and click OK, this is to start the command prompt window from which you will be able to choose your format style and name your drive.
Step 7.Then the command prompt window is opened and you will need to type ”Format G
Step 8. The G in this instance refers to our example Pen drive location, instead you would enter the letter that you remembered or wrote down from the my computer side panel After you have typed the above command press enter.
Step 9. Here, you will be asked to press enter again and then to give a name for your drive. Follow these prompts then click on enter again.
You have completed the process of Formating pen drive using cmd; go back into my computer to check that the formatting has been completed successfully.
Blogger Comment